Installer re-certification is recommended annually, 12 months from the last certification date. Please review your Company Procedures and/or Operator Qualification requirements for specific re-certification intervals. In no case shall the re-certification interval exceed 36 months from the last certification date. Re-certification may be accomplished by a thorough review of the PermaWrap™ / WeldWrap™ installation procedures and successfully completing the written re-certification exam.
If the installer fails to re-certify during this 36-month period, the installer certification will expire 36 months from the last re-certification date. In this case the installer must attend a new certification class.
We recommended the applicant use the PermaWrap™ Installation Manual during the re-certification examination. It is very important the applicant have a thorough knowledge and understanding of the correct procedures necessary to apply the PermaWrap™ / WeldWrap™ composite reinforcement systems correctly and safely. If the applicant has any questions or does not understand a procedure, please consult your Certified Trainer or contact a WrapMaster representative for assistance. A minimum score of 80% is required in order to attain re-certification.


Instructions: (1) Download the Installation Manual and Certification / Re-certification Exam. (2) Read the instructions at the top of the Exam and fill-in the necessary applicant information requested. (3) Review the PermaWrap™ / WeldWrap™ documentation thoroughly and complete the exam. (4) Print the Certification / Re-certification Exam for your records. (5) Fax, mail or scan and email the completed examinations to the address below. (6) A WrapMaster representative will review the exam and update the Installer's Certification date in the WrapMaster database of Certified Installer's. Fax: (903) 643-8181 Email: info@wrapmaster.us

Manual
Exam
INITIAL CERTIFICATION
RE-CERTIFICATION
Revised 07/29/2015 WrapMaster, Inc.
 © 2000-2015 All rights reserved. Reproduction in whole or in part is strictly prohibited without the expressed written permission of WrapMaster, Inc.
DISCLAIMER
test_thumb.jpg
Manual
Exam
En Espanol
En Espanol
manual_thumb.jpg test_thumb.jpg sp_manual_thumb.jpg
Composite solutions
for Pipelines and Structures
Contact us
Plug-n-Wrap
WeldWrap
PermaWrap
Home
Links
Literature
Training
Distributors
PermaWrap Installation Video
WeldWrap Installation Video
PermaGlass
WrapMaster, Inc. recommends the installation of the PermaWrap™ and WeldWrap™ Pipe Reinforcement Systems be made, ONLY by Certified Installers. There are two levels of certification available to the customer.

Installer: 1 day course (classroom & hands-on) at the Customer’s or WrapMaster’s Facility. This level of training provides application techniques for various scenarios and general product knowledge. The Installer must stay current by re-certification. Please see our re-certification guidelines below.

Trainer: 2 day course (classroom & hands-on) at the Customer’s or WrapMaster’s Facility. This level of training provides application techniques for various scenarios, thorough product knowledge, training records and the use of engineering analysis software, etc. Upon completion, the individual will be fully qualified to train and certify others to install the PermaWrap™ and WeldWrap™ Systems. To maintain trainer certification, a trainer must complete annual re-certification online and attend biennial training with a WrapMaster Trainer.
Training